Differences

This shows you the differences between two versions of the page.

--- azure [2021/10/28 16:52]
rafi
+++ azure [2021/10/28 18:45]
rafi
@@ Line 136: / Line 136: @@
 **Virtual network gateway:** Since you are connecting from this gateway this value (the IP you received from Azure) is fixed.
-**Local network gateway:** The local network gateway (your Perimeter 81 network address) which you have just created is the fixed value.
+**Local network gateway:** The local network gateway (your Privatise address) which you have just created is the fixed value.
-**Shared Key:** the value here must match the value that you are using for your local on-premises VPN device.
+**Shared Key:** This will be provided to you by our support team.
 The remaining values for **Subscription**, **Resource Group**, and **Location** are fixed as well.
@@ Line 145: / Line 145: @@
 {{::httpsfilesreadmeiob6405e8-screenshot2019-05-30at84806.png?nolink&200|}}
-**Perimeter 81 Settings**
-. Open your Perimeter 81 Management Platform and go to the Network tab.
-{{::screen_shot_2021-02-17_at_19.31.14_3_.png?nolink&200|}}
-. Go to the gateway in your network from which you want to create the tunnel to Azure, select the three-dotted menu (...) beside it, and select Add Tunnel.
-{{::360009521040image7-newip.jpg?nolink&200|}}
-. Select IPSec Site-2-Site Tunnel and select Continue.
-. Fill in the fields with the following information:
-**Name:** Enter a name of your choice.
-**Shared Secret:** Enter the same Shared secret you set in the Azure Portal.
-**Public IP:** Enter the Azure Virtual network gateway public IP.
-**Remote ID:** Enter the Azure Virtual network gateway remote ID.
-**Perimeter 81 Gateway Proposal Subnets:** Choose the purposed IP range.
-**Remote Gateway Proposal Subnets:** Enter the Azure Virtual network gateway subnet/range.
-**Advanced Settings**
-**IKE Version:** V2
-**IKE Lifetime:** 1h
-**Tunnel Lifetime:** 1h
-**Dead Peer Detection Delay:** 10s
-**Dead Peer Detection Timeout:** 30s
-**Encryption (Phase 1) :** aes256
-**Encryption (Phase 2) :** aes256
-**Integrity (Phase 1) :** sha1
-**Integrity (Phase 2):** sha1
-**Diffie-Hellman Groups (Phase 1):** 2
-**Deffie-Hellman Groups (Phase 1):** 2
-{{::untitled-1.jpg?nolink&200|}}
-. Select Add Tunnel.
 **Verifying the VPN connection**