ras-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ras-setup [2021/03/30 19:55]
rafi
ras-setup [2021/03/30 19:55] (current)
rafi
Line 36: Line 36:
  
 1. Go to server manager 1. Go to server manager
 +
 2. Click on tools and then routing and remote access from the dropdown. 2. Click on tools and then routing and remote access from the dropdown.
 +
 3. Right click on your server under "Routing and Remote Access" in the left menu and click "configure routing and remote access". 3. Right click on your server under "Routing and Remote Access" in the left menu and click "configure routing and remote access".
 +
 4. Click next to configure. 4. Click next to configure.
 +
 5. Click custom configuration and next. 5. Click custom configuration and next.
 +
 6. Click VPN Access and LAN routing and next. 6. Click VPN Access and LAN routing and next.
 +
 7. Click finish. 7. Click finish.
 +
 8. Enable the service. 8. Enable the service.
  
 If you want to forward a specific NAT, once the RAS is enabled please reach out to support for which subnet to forward, which DC, and under which company. Support will add that subnet to be forwarded by the DC and the last step will be for you to restart Privatise on the DC. If you want to forward a specific NAT, once the RAS is enabled please reach out to support for which subnet to forward, which DC, and under which company. Support will add that subnet to be forwarded by the DC and the last step will be for you to restart Privatise on the DC.
  • ras-setup.txt
  • Last modified: 2021/03/30 19:55
  • by rafi